By the Nivelle Trade Desk. Reviewed by the Nivelle New York team.
Approve the sample against a written spec, then treat the approved sample as the master that every reorder is checked against. At Nivelle, production starts only after the client approves the sample, and the approved sample becomes the standard for every future order.
This guide uses one example: a 2 ct 4-prong tennis bracelet in 14K, specified for a multi-store program. Nivelle's product data for the 4-prong classic tennis bracelet (2CT model) lists 62 stones and approximately 1.95 ctw at 6.5 inches, and 66 stones and approximately 2.10 ctw at 7.0 inches. Weights are approximate and confirmed on the quote.
Why the sample is the standard
A written spec says what you want. The sample shows what you will get. Signed and dated together, they give every reorder a clear reference: the same count, weight range, color and clasp.
What the buyer approves at sample stage
A tennis bracelet repeats one detail dozens of times, so small drifts add up. Put each item in writing before you sign off.
- Stone count and size. 62 stones at 6.5 inches, 66 at 7.0 inches. Record the stone diameter in millimeters on the approval record; Nivelle confirms it on the quote.
- Total weight and tolerance. Approximately 1.95 ctw (6.5") and 2.10 ctw (7.0"), confirmed on the quote. Agree the tolerance in writing.
- Color and clarity. Write the color and clarity range from the quote on the record. The stones in this example are natural. Keep the supplier specification separate from any independent lab finding.
- Metal, karat and alloy. 14K, with the white, yellow or rose gold color named on the record. On white gold, name the alloy as well.
- Gold weight and tolerance. Record the finished gold weight in grams for each length on the approval record; Nivelle confirms it on the quote.
- Prong style and drape. 4-prong. Check prong height and shape at 10x magnification, then lay the bracelet flat and drape it over your hand. The links should move freely and should not flip or kink.
- Clasp type and safety. Name the clasp type on the record; Nivelle confirms it on the quote. Test it by hand: it should close with a positive click, hold a gentle tug, and any safety catch should engage.
- Length. The closed, wearable length for each size, measured the same way every time. An end-to-end length with the clasp open is a different number.
- Finish and polish. Describe the finish you expect on the record.
- Rhodium plating on white gold, where applicable. Confirm whether plating applies, and decide how your product copy will describe it.
- Stamp and logo placement. Nivelle can apply a logo and hallmark on private label. Agree the position on the piece and note it on the record.
- Packaging. If packaging is part of the quote, approve it on the sample.
Karat stamp, trademark and weight claims
Under the National Gold and Silver Stamping Act (15 U.S.C. 297(b)), a piece that carries a gold quality mark such as 14K and moves in interstate commerce must also carry the registered (or applied-for) US trademark, or the name, of the manufacturer or dealer responsible for it. Fineness is tested against a tolerance of 3 parts per thousand without solder and 7 with solder under 15 U.S.C. 295, as the FTC Guides note. Decide on the record whose mark accompanies the 14K stamp. Private label work at Nivelle is covered by an NDA.
The FTC's 16 CFR Part 23 Guides also address diamond weight. Under 16 CFR 23.18, a weight stated in decimals, such as 1.95 ctw, should be accurate to the last decimal place, and fractional weights need a not-exact disclosure with a range. So an approximate catalog weight and the weight on your tag are different things. Ask for actual set weight on the invoice, and have your tags reflect it.
What QC checks on each reorder
Every piece is inspected by the Nivelle New York team before it ships. On a reorder, check against the approved sample:
- Stone count matches the record for the size ordered.
- Total weight and gold weight are within the agreed ranges.
- Stone color compared side by side with the master sample, under the same light.
- Prongs and stone seats checked at 10x for snags or loose stones, and the links drape without flipping.
- Clasp opens, closes with a click and locks, and any safety catch works.
- Karat stamp, trademark and logo are legible and in the approved place.
- Closed wearable length is within the agreed range.
- Finish, polish and plating match the master.
For bulk and program orders, Nivelle applies IGI or GSI screening. Ask what screening applies to your order when you request a quote. Clients can also get synced trade price sheets and a shared order status sheet.
What variation is acceptable
No two production pieces are identical to the thousandth, so agree what counts as a match. The tolerances below are assumptions, offered as an example to agree in writing. They are not Nivelle guarantees. Ask which tolerances apply to your order and write them into the approval record.
| Item | Example tolerance (assumption only) |
|---|---|
| Stone count | Exact match to the record |
| Total diamond weight | Within plus or minus 3% of the approved sample |
| Gold weight | Within plus or minus 5% of the approved sample |
| Closed wearable length | Within plus or minus 2 mm of the stated length |
| Color | No visible difference from the master under the same light |
| Clasp function | Pass or fail, no tolerance |
| Stamp | Present, legible, in the approved place |
What triggers a fresh approval
These changes are not variation. They change the piece, so ask for a new sample and sign-off when any of them happen:
- A new stone source.
- A change of metal, karat or white gold alloy.
- A clasp change.
- A length outside the approved range.
- A new mold.
- A color shift beyond the agreed range.
A simple approval record
Fill this in at sample sign-off, date it, and keep a copy with the master sample.
| Item | Approved value | Tolerance agreed | Sign-off |
|---|---|---|---|
| Stone count and size | 62 (6.5") / 66 (7.0"); diameter in mm per quote | Exact count | |
| Total weight | approx. 1.95 / 2.10 ctw | Agree in writing | |
| Color and clarity | Range written on the quote | Agree in writing | |
| Metal, karat, alloy | 14K, color and white gold alloy named | Fineness per the Stamping Act | |
| Gold weight | Finished grams per length, per quote | Agree in writing | |
| Prong style | 4-prong, no-flip drape | Visual match | |
| Clasp | Clasp type per quote | Click, tug and lock pass | |
| Closed wearable length | 6.5" / 7.0" | Agree in writing | |
| Finish and plating | As described on the record | Visual match | |
| Stamp and logo | Karat stamp, trademark, logo | Legible, in place | |
| Packaging (if quoted) | As approved on the sample | Match |
Frequently asked questions
How long do samples and reorders take?
Samples take 3 to 4 weeks. Made-to-order pieces then take 4 to 6 weeks after sample approval. Both are confirmed on the quote. Production starts only after you approve the sample.
Do tennis bracelets ever ship from stock?
Some tennis styles ship from stock. Ask on the quote whether your style does, and which timing applies.
Are the stated weights exact?
No. They are approximate and confirmed on the quote, so agree the tolerance before you approve.
When does the NDA start?
Coverage starts when the agreement is signed and can be backdated to cover conversations in the prior weeks.
Tell us what you need
Pricing for your order is confirmed on the quote. See private label and how we work. Tell us the style, target retail price, and expected reorder volume.
Leave a comment