By the Nivelle Trade Desk. Reviewed by the Nivelle New York team.
The best custom jewelry manufacturer for the wholesale trade is one that takes your CAD file or sketch, shows you a sample before production, and then reproduces the approved piece the same way on every reorder under your hallmark. The questions that separate a good custom partner from a frustrating one are about process: what file to send, who checks it, who owns the design afterward, and how long each step takes.
This guide covers how a CAD-to-production job runs, then compares four trade suppliers a US retailer is likely to shortlist: Star Gems, Overnight Mountings, Gurudiam and Nivelle. We are one of the four. Facts about the other three come from their own websites as of November 2026; where a site does not state something, we say so. For the own-brand side of the decision, see our comparison of private label and white label fine jewelry manufacturers.
How a CAD-to-production order works
Most trade manufacturers follow the same five steps. The table below lists each step, what you send or approve, and the question to ask the manufacturer, so you can compare quotes on the same basis.
| Step | What you send or approve | What to ask the manufacturer |
|---|---|---|
| 1. Brief | A sketch, a reference photo, or your own CAD file (for example .3dm or .stl) | Do you accept retailer CAD files, and do you also build CADs in house? |
| 2. CAD review | A render or dimensioned CAD for your sign-off | Is the file checked for manufacturability (wall thickness, prong size, closed mesh) before anything is cast, and what happens if it fails? |
| 3. Sample | A finished sample in the specified metal and diamonds | What is the sample lead time, and does the approved sample become the standard for production? |
| 4. Production | A purchase order against the approved sample | What is the production lead time, and who inspects the pieces before they ship? |
| 5. Hallmark, reorders | Your logo and the required metal quality mark | Who owns the CAD and any molds afterward, and will the tenth reorder match the first? |
At a glance
Nivelle publishes this guide and is one of the four suppliers compared in the table below.
| Supplier | CAD services stated on its site | Sells to | Lead times stated on its site |
|---|---|---|---|
| Star Gems | In-house CAD, more than 25,000 CAD designs; customer CAD files not stated | Jewelry industry businesses; states it does not sell to consumers | Not stated |
| Overnight Mountings | CAD renderings for approval, printing and casting service; customer CAD files not stated | Retail jewelers | Production in 5 to 7 business days; casting ships in 24 to 48 hours |
| Gurudiam | 3D CAD render within 24 hours from a sketch or photo; customer CAD files not stated | Trade only | 4 to 6 working days from approved CAD; complex pieces 2 to 3 weeks |
| Nivelle | Accepts retailer and brand CAD files for production; in-house CAD design | Trade only | Samples 3 to 4 weeks, production 4 to 6 weeks, confirmed on the quote |
Confirm current terms with each supplier before sending a file.
The suppliers
Star Gems
Star Gems describes itself as a full-service B2B jewelry manufacturing partner for qualified jewelry-industry businesses, with a primary focus on independent retailers. Its site lists CAD design done in house, casting, stone setting and finishing, and more than 25,000 CAD designs, and says it will create a CAD to show your customer and adjust it until it is right. Best fit: a store selling one-off custom work. Where it may fall short: acceptance of a retailer's own CAD file, production lead times and lab-grown diamonds are not stated on the site.
Overnight Mountings
Overnight Mountings presents itself as a family-owned American jewelry manufacturer in business since 1991, building custom fine jewelry for retail jewelers, with CAD renderings for approval within 24 to 48 hours, a printing and casting service with orders shipping in 24 to 48 hours, production in 5 to 7 business days and a lab-grown diamonds category. Best fit: a finished custom piece on a short lead time. Where it may fall short: the site invites sketches, screenshots and catalog references but does not state whether it accepts a retailer's own CAD file.
Gurudiam
Gurudiam describes itself as a B2B wholesale supplier and custom manufacturer for the trade only, with a 3D CAD render within 24 hours from a sketch or photo, casting only after approval, and 4 to 6 working days from approved CAD (2 to 3 weeks for complex pieces), with lab-grown or natural center diamonds on custom orders; its site also lists 10,000+ IGI and GIA certified diamonds. Best fit: single custom pieces against a client's spec. The gap: acceptance of a retailer's own CAD file is not stated.
Nivelle
Nivelle is a New York-managed custom, private label and wholesale supplier for retailers, brands and designers, a family business since 1978 and now in its third generation. We accept a retailer's or brand's own CAD files for production and offer in-house CAD design from a sketch or reference piece. Production is managed from New York through our vetted manufacturing partners, with setting, finishing and repair done in New York on select pieces. Every piece is inspected by our New York team before it ships. Private label runs under NDA with your logo and hallmark on the piece. We sell to the trade only. Trade price sheets are synced to the gold market, and pricing for your order is confirmed on the quote. Where we fall short: if you need a finished one-off piece inside a week, Overnight Mountings and Gurudiam state shorter lead times than ours.
A Nivelle example: the CAD-to-production sequence
These are the steps a Nivelle custom or private label job follows, taken from our how we work and custom manufacturing pages.
- Brief or file. You send a CAD file, a sketch or a reference piece. If you send a CAD, we work from it, with terms confirmed on the quote; if not, we develop the concept into a CAD for your approval.
- Approve the specification. Setting style, diamond weight, length, metal and branding are confirmed before production begins.
- Sample. Samples run 3 to 4 weeks, confirmed on the quote. Production starts only after you approve the sample, and that approved sample becomes the standard every future order is checked against.
- Production and inspection. Production runs 4 to 6 weeks, confirmed on the quote. Every piece is inspected by our New York team, with IGI or GSI screening on bulk and program orders. A piece that does not match the approved standard does not ship.
- Hallmark and reorder. Your logo and the required metal quality mark go on the piece. Reorders are made to the same specification as the pieces you have already sold.
Frequently asked questions
Will a custom jewelry manufacturer review my CAD file for manufacturability before production, and how are changes handled?
Most trade manufacturers check wall thickness, prong dimensions and whether the mesh is closed before casting, and return the file with notes if it fails. At Nivelle, setting, diamond weight, length, metal and branding are confirmed with you before production begins, and any CAD revisions and their cost are confirmed on the quote.
Who owns the master CAD files and resulting designs after I pay for custom development?
It varies by manufacturer, so get it in writing. At Nivelle, how your CAD files are used and who owns the resulting designs is confirmed in writing on the quote; ask every supplier you compare for the same.
How many CAD revisions are included in a custom quote?
Few trade manufacturers publish a fixed number because it depends on how finished the brief is. At Nivelle, revision counts and any CAD fee are confirmed on the quote; ask every supplier you compare for the same line in writing.
What are the approval milestones between a sketch, a CAD render, a sample and full production?
Typically: brief, CAD or specification approval, sample approval, then production against the approved sample. At Nivelle the sample runs 3 to 4 weeks and production 4 to 6 weeks, both confirmed on the quote, and production starts only after you approve the sample.
Does a CAD-to-production manufacturer take one-off custom orders as well as repeat production for a store's own line?
Many do both, but the quote typically differs: a one-off is priced per piece, while a repeat program is quoted on the approved sample and reordered to the same specification. Nivelle works with retailers, brands and designers, and approved styles are reproduced consistently on reorder.
Work with Nivelle
Nivelle is a New York-managed custom, private label and wholesale supplier of lab-grown and natural diamond jewelry for retailers, brands and designers. We accept your CAD files or design them in house, and we run private label under NDA with your logo and hallmark on the piece. Trade price sheets are synced to the gold market, and pricing for your order is confirmed on the quote. Nivelle sells to the trade only; a Tax ID and trade references are required.
Become a retail partner, schedule a 15-minute introduction, or email sales@nivelle.nyc.
Nivelle, New York. A family business since 1978.
Leave a comment